Smallest and densest?

Juniper Networks has unveiled two new products designed to address key challenges facing service providers as they converge their networks to optimize their business.

  • 11 years ago Posted in

First, Juniper Networks has advanced the industry's first and only Converged Supercore(TM) for service providers with the introduction of the Juniper Networks(R) PTX3000 Packet Transport Router. Unlike other core routers that are so large that they often require building retrofits and redesigns, the new Juniper Networks router at 10.6 inches in depth can be installed in virtually any space and energy constrained environment. The PTX3000 router's capacity is designed to rapidly scale over time up to 24 terabits per second (Tbps), enabling PTX3000 to simultaneously stream high-definition video to as many as three million households.

In addition, Juniper Networks announced an integrated packet-transport physical interface card (PIC) with two-ports of line rate 100 Gigabit forwarding for the entire PTX family, which will now enable service providers to cost-effectively interconnect sites more than 2000 kilometers (1243 miles) apart, the equivalent distance between San Francisco, Calif. and Denver, Colo.

Reshaping Optical Core Routing: The PTX3000 breaks the mold for core routers shipping at almost 4Tbps in capacity, scaling up to 24 Tbps of total capacity and a mere 10.6 inches deep -- approximately the length of an Apple iPad. The PTX3000 Packet Transport Router provides network operators with groundbreaking size, performance and efficiency, addressing practical barriers that service providers face in upgrading networks today. The router follows Juniper's 2011 introduction of the world's first Converged Supercore, a new architecture to bring together the packet and transport worlds, and addresses the scale and flexibility challenges that today's service providers face. With the PTX3000, Juniper has redefined the upgrade so that one technician can manually hand-carry and install a PTX3000 within a matter of minutes versus hours.


Industry's Lowest Power Footprint: With a simplified architecture, the PTX Series allows network operators to converge their networks from nationwide backbones down to the metro core, driving significant operational efficiencies. Juniper's approach collapses the traditional core architecture to deliver unprecedented scale at the lowest power footprint in the industry at less than one watt per Gigabit. PTX3000 customers can get started with a minimum configuration of as little as 1200 watts and a single power feed -- allowing smaller operators in space and power-constrained environments to be up and running quickly, while realizing all the benefits of the Converged Supercore.


Rapid Service Expansion at a Fraction of the Cost: Powered by the purpose-built Junos(R) Express chipset and the proven reliability of the Junos operating system, the Juniper Networks PTX Series Packet Transport Router can scale for years to come, allowing operators to deliver mobile services to millions of subscribers at a cost savings of up to 65 percent over legacy architectures.


No Compromise of Performance and Scale: The PTX Series delivers unmatched efficiency, wire-rate performance on all ports simultaneously, even for the smallest packet sizes, and by far the industry's lowest latency while at the same time reducing the cost of network ownership.


Resetting the Density Bar for 100G Optical: Designed to cost-effectively interconnect long-haul metro sites, the integrated packet-transport 100G DWDM OTN interface card offers the industry's highest density 100G optical routing capabilities for use in open, standard-based architectures. It effectively reduces network complexity and offers transport performance with packet advantages. The new optical PIC also delivers the flexibility to operate across the entire PTX Series.
 

The first transoceanic cable to achieve 1/2 Petabit per second capacity, and also the first to...
10-year contract forms part of East Sussex Council’s new procurement Framework initiative serving...
CommScope High Density R-PHY Shelf to support DAA and virtualization across global broadband...
Djibouti Telecom is leveraging Ciena’s GeoMesh Extreme solution to upgrade its DARE1 (Djibouti...
New dual band stabilisation technique cancels the problem of temperature fluctuations to allow long...
Aryaka Networks has introduced its latest Services Point of Presence (PoP) in Dublin, Ireland,...
The service is the first of its kind to be trialled across the Atlantic on a live network and will...
SpaceX will locate Starlink ground stations within Google data center properties, providing...